home HOME > Indicator

Digital indicator - Graphic indicator DN-GI200, GI100


. Grapic touch Indicator

     -Color Graphic LCD Touch Screen.
. Diverse of Load Control Mode.
DN-GI100: 1ch indicator (load cell)
                -High sampling speed , 4,000/1sec

DN-GI200: 2ch indicator (CH1 :load cell,CH2:Distance Sensor)
               - High Sampling Speed: 2,000/1sec.(per 1ch )




gi drawing.jpg 


Specifications DN-GI200,  GI100
Sensor EXC            A-CH (load cell):DC 10/5V,120mA,                         B-CH : B-CH(Distance Sensor)
Input Signal Range            A-CH ;0~±40mA,                                                  B-CH :0 ~±10V,4~20mA,0~20mA
Conversion Speed            A-CH : 4,000times/sec.                                          B-CH : 2000/sec
Non-linearity            A-CH : ±0.02% F.S +1digit,                                    B-CH : ±0.02% F.S+1digit
Input Sensitivity            A-CH :1.0㎶/Digit,                                                   B-CH :1.0mV/Digit (0~10V)
Input Impedance            A-CH 10Mohm                                                       B-CH :1 Mohm / 50ohm
Temperature Factor. ±0.005% of rdg +0.5 digit/℃
Analogue Filter 10,30,300,600 Hz
Digit 0~±99999
Circumstance 0~40℃
Power AC 100~240V, 50/60Hz
Consumed Power Around 32VA

                        Standard : Relay Output (HH,HI,GO,LO,LL)                                                    

                        OPTION:1.RS-232C serial output
                                      2.RS-485 serial output
                                      3.±0~10V or 4~20mA Analogue output
                                      4.BCD parallel output
                                      5.SD memory card

Display Window STN color LCD, 74(W)×55(H)mm




torque sensor l loadcell l Tension load cell l Strain gauge load cell l Torque Sensor l Torque transducer l Digital weighing indicator l Explosion proof indicator l Force gauge l Pressure sensor